UA-33088940-1
  • WILTEX TEXTILE AMPLIFIER/TEXTILE FIXER 1 LTR

WILTEX TEXTILE AMPLIFIER/TEXTILE FIXER 1 LTR



Wiltex textile fixer or textile reinforcement is suitable for fixing and reinforcing garments, for bonding paper, wood, stone, etc. (no metal and plastic) and to be used as clear lacquer for the protection of wood, gypsum.

Wiltex is dilutable with water, is transparent after drying, does not dissolve in water and is suitable for outdoor use.
Can be colored with water-based pigments, and after drying can be well painted with, for example, acrylic lacquer.


Instructions:
Dip the garments into the Wiltex mixture several times and allow the surplus to drip out or wring out the garments slightly. Avoid the creation of air bubbles as much as possible.
If there are too many air bubbles on the garment, you can have them pop open by blowing it over with a warm hair dryer before they are dried.
For indoor use this often gives sufficient strength after drying and curing.
For rain resistance, it is advisable to apply a second, possibly a third layer, with a brush after drying of this first layer, so that all textile fibers are properly "wrapped".
After drying, the hardening begins.
At room temperature, the product will already feel solid after a day.
For the good water resistance, a little longer curing is required.
The process can be speeded up by slightly increasing the temperature.
A few days in the sun helps fine.


Brand: Wilsor

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

WILTEX TEXTILE AMPLIFIER/TEXTILE FIXER 1 LTR

  • Product Code: gg1 00028
  • Availability: In Stock
  • €29.95

  • Ex Tax: €23.10